7
PSE
Continued
iv.
Reach under the power supply and twist the bracket
locks into place .
v.
Once the power supply enclosure is installed, do not
attempt to fold the SPYDR 2 module . Doing so will cause
significant damage to the fixture .
PSU
If your SPYDR 2 came configured with a power supply
unit (PSU) the mounting brackets can be attatched to the
unit before installing onto light bars .
i.
Place the PSU on a flat level surface and identify
the reinforced corner mounts on unit and securing posts
on brackets .
ii.
Insert bracket posts into the corner mounts of the
PSU . The center fins of the bracket will fit inside of the
PSU’s heat sink .
iii.
Push/slide bracket in towards PSU until the bracket
clips into place . Repeat on opposite side .
iv.
Once brackets are securely attached flip unit over and
clip on to center light bars of the SPYDR2 fixture .
“CLICK”
iii.
i.
ii.
iv.
