10
WARNING
Risk of electrical shock .
To reduce the possibility
of serious injury,
always take the proper
precautions and unplug
the fixture before moving
or cleaning .
WARNING
Fixture and power
supply are UL 1598
Wet Location rated but
are not designed to be
submerged in water . In
the event that the module
or power supply enclosure
becomes submersed,
first
disengage the circuit
breaker
, then unplug
submersed components
before proceeding to
remove from water .
CAUTION
To prevent eye damage,
avoid looking directly at
the unshielded LEDs .
CAUTION
LED and heat sink
surfaces may be hot .
Allow sufficient cooling
time before handling .
CAUTION
To reduce the risk of
overheating or fire,
never place operating
fixtures face down on
a flush surface . Always
allow for adequate
ventilation of fixtures
and power supplies .
ETL Rating: SPYDR 2 fixtures are rated suitable for wet locations . A “wet location” is defined as an interior or exterior location in
which water or other liquids may drip, splash or flow on or against the electrical components of a lighting fixture . SPYDR 2 Series
fixtures and power supply are certified to meet UL standards (ETL) from the Intertek safety consulting and certification company .
Systems are cETL listed and are rated IP66 by IEC standard 60529 .
1 PPF calculations compiled using integrating sphere measurements and typical spectroadiometric data for each LED to determine typical fixture performance . Actual photometric results
may vary within the LED manufacturer’s bin tolerance .
2 Wattage values are typical expected values . Fluence maintains a tolerance of +- 10% on flux and power specifications . Target light levels can vary from projected levels depending on
ambient temperature, room reflections values and dirt accumulation .
