7
Work position
Press the red button up and lower the handle into the work position.
The transport wheels move up and the Orbiter can be operated.
Adjusting the brush pressure
The brush pressure can be adjusted to four settings using the black button on the left side of the machine
(pressure regulator). A higher pressure makes more sense when working outdoors.
Minimal pressure is reached with the lowest setting. Maximum pressure with the highest setting.
If the motor does not start, reduce the pressure regulator by one level.
Attention:
When using the machine for the first time, some loose bristles may come out of the brush body. Turn the Orbiter
off and disconnect from the mains. Now remove the bristles from the drum and then restart the machine.
Note:
Only use the universal brush (white brush) in internal areas!
The abrasive brush (hard brush) is recommended for external areas.
Water supply
Guide the end of the Bowden cable through the front cover into the holder
in the fresh water tank. The Bowden cable is secured by gently pushing it into place
and turning in a clockwise direction. Turning in the opposite direction loosens the cable.
The cleaning agent is applied to the floor as required
by pulling the white liquid lever.
If the lever is released the supply stops immediately.
Summary of Contents for Wood Orbiter
Page 2: ......
