5
Place the free end of the Bowden cable into the nozzle shoe of the fresh water tank. Now the cable is secured by gently
pushing and turning in a clockwise direction and you can close the cover.
Position the tank between the tubular stems and fix it to the tank holder by turning the retaining collars down.
Important: FIRMLY tighten the 4 screws using the washers. If the tank is not sitting correctly it will leak.
Finally:
Connect the power cable
Remove the dirt pan. Before the connector can be inserted you must remove the
2 small screws on the right-hand side of the housing, only then can the connector
be firmly pushed into place, as far as it will go, using the back of your hand.
Gently tighten the screws.
The Osmo Wood Orbiter is now ready for operation.
Summary of Contents for Wood Orbiter
Page 2: ......
