background image

 

 

 
 

 

 
Osmo Holz und Color GmbH & Co. KG 
Affhüppen Esch 12, 48231 Warendorf 
 

 

- 2 - 

 
Holzimport 
Industriehobelwerke 
Farbenwerk 

 
www.osmo.de 
 
 

 

 

 

These operating instructions are intended for operating personnel. 
1.  Please  make  yourself  familiar  with  the  notes  and  recommendations  of  these  operating 

instructions before assembly, starting and maintenance of the machine.  

2.  By  doing  so,  you  will  control  the  machine  in  a  safe  manner  and  enhance  its  performance. 

Servicing  and  maintenance  as  per  these  operating  instructions  improve  your  safety  and 
maintain the machine’s value. 

3.  The  manufacturer  accepts  no  liability  for  personal  injury  and  damage  to  property 

arising from improper use of the machine!

 

 
 

1. Safety regulations 

 
For your safety 
Before  starting  the  floor  cleaning  machine,  it  is  imperative  to  read  these  operating  instructions 
and always keep them ready at hand. 
The floor cleaning machine must not be used by persons which are not instructed in its use and 
expressly charged with its operation. 
 
Attention!    The  FloorXcenter  is  not  suited  for  the  treatment  of  surfaces  from  which  dusts  and 
liquids hazardous to health are being detached. Do not cross steps! 
 
Caution!  
Never cross over the electric cable with the machine. Danger of electric shock! 
 
General 
The operation of the FloorXcenter is subject to the current national regulations. 
Besides  the  operating  instructions  and  the  current  and  binding  regulations  concerning  accident 
prevention in the country of use, the approved technical rules for safe and professional working  
have to be adhered to also. Any operation method which can be deemed as critical or dangerous,  
in terms of safety must be refrained from. The use of the appliance on public ways and streets is 
not allowed. 
 
Use of the machine in accordance with regulations 

• 

The FloorXcenter is exclusively intended for internal use in buildings.  

• 

Any further use is not deemed to be in accordance with the regulations. The manufacturer will 
not  be  liable  for  any  damage  arising  from  such  use;  such  risks  and  the  results  thereof  are 
solely the liability of the user. 

• 

To use the machine in accordance with the regulations also means to observe the provisions 
concerning operation, maintenance and servicing specified by the manufacturer.  

• 

The  pertinent  rules  and  regulations  concerning  accident  prevention  as  well  as  all  other 
generally approved safety and working regulations have to be adhered to. 

• 

Unauthorized  modifications  of  the  machine  will  void  all  guarantees  and  the  liability  of  the 
manufacturer for any resulting damage. 

• 

Before using the machine, floor coverings have to be tested for their suitability for this cleaning 
method!  

• 

Mind  the  surface  pressure  with  point-elastic  floors,  e.g.  in  gyms,  use  with  caution  and  test 
appropriately before use!  

• 

The manufacturer is not liable for any damage caused to surfaces upon incorrect use of the 
machine or its accessories. 

 
 

Summary of Contents for FloorXcenter









Reviews: