OSHIMA OP-1200, Operating Manual, Page: 17 / 49

- 16 -
六、
The adjusting method of the temperature controller
1. The adjusting method of the temperature: Press" SET" key first, see SV
manifestation number hereafter, pass the F\
◄ ,
▲
, OFF\
▼
three keys match with,
setting up temperature as the temperature needed, then clicking the key of SET once
to withdraw the enactment environment.
2. The enactment of the alert temperature: Continue to press to press the key of
SET then would show ALI, SLH two parameters, represent respectively the alert value
set up with alert the upper limit the value, passing the F\◄
◄
,
▲
, OFF\
▼
three
keys match with, can immediately set up this parameter.
3, after setting up the over number, continue press down the key of SET, be after
displaying the " LCK", change its value as the "1", to target the temperature controller.
4, attention: In machine use process you a root of whiskers is then to the value
that set up the " SV" according to your request, if have no the other demand or appear
the accident circumstance please do not change the parameters of thermostat without
certificated OSHIMA technician!
七、
Temperature controller abnormality and expel
Phenomenon Reason Expel the method
The temperature controller
do not work SV value is 0000 Set up the SV temperature
the value higher
than often worth
The temperature controller The temperature Replacing the temperature