OSHIMA OP-1200, Operating Manual, Page: 13 / 49

- 12 -
6
、
After job finished, please adjust the pressure valve to pressure 0kg/cm, and then
to turn off the cooling system, and start the auto stop cooling. The auto stop
cooling will cool the machine for 60 minutes, and the power will be
automatically shut off.
三
. CONTROL PANEL
四、
NOTICE
：
1
、
Please kindly keep the machine clean. Before using machine, please use the air
spray gun to clean the inside dust and alien object away. ( Please pay extra
attention to check whether there is any interlining stuck on the roller. )
2
、
On the working table, any hard material such as scissor, pens, rulers, hardware,
plastic, are prohibited.
3
、
When machine is working in high temperature fusing, the sudden stop will be
damaging machine. If there is any sudden stop occurs, please do rotate the machine