OSHIMA OP-1200, Operating Manual, Page: 14 / 49

- 13 -
run by manual to prevent damage of high heating temperature.
4
、
To replace the cleaning rod regularly. The fabric folded on the cleaning rod must
be pure cotton.
5
、
Please clean the Teflon belt regularly after work and also replace the cover of
cleaning rod. ( Please do use the specific belt cleaning solution to ensure the belt
duration. )
a) If the glue of the interlining is left too much on the belt during fusing work,
the belt must be cleaned every 4 working hours.
b) If the glue of the interlining is not left on the belt during fusing work, the belt
must be cleaned every 16 working hours.
c) When cleaning the belt, please rob the Teflon belt above the rollers or the exit
of the machine.
d) If the belt guiding is controlled by microswitch, please do keep away from
these electronic components to avoid malfunction.
6
、
Please do lubricate the bearing and chains and all the transmission parts every
month to ensure the parts duration.
7
、
When fusing the thicker of the interlining with fabric, please do release the
pressure as less as possible ( or even non pressure ) or the machine will be stuck.
8
、
If machine is to be moved place to place, to keep the machine in Horizontal is
necessary. Keep the machine horizontal will ensure the belts from warping.
9
、
With the cylinder type pressure machinery, please avoid the oil gauge empty.
Please do put the oil sufficient all the time. And the left oil of the filter, please do
release to keep it clean
.
10
、
When doing the fusing jobs, please do keep the interlining smaller than the fabrics
to ensure the machine working properly.