OSEE RMD4342-HSC, User Manual

Page: 8 / 27

RMD4342 LCD MONITOR User Manual
—
4
—
Chapter 4 Using the RMD4342
4.1 Status Display of the Screen
1. LED Tally Light : This tri-color (red/green/amber) light is controlled through a DB9
connector on the rear panel. For more information about the DB9 connector, refer to
“Rear Panel” on Chapter 4.4.
2. Input Signal Format : It displays the input signal format and can be set in the MAIN
Menu.
3. Safe Areas : Multiple safe areas are configurable in the
MAIN Menu
.
4. Audio Meters: Levels for the audio. For RMD4342-SC, only two meters on the left
side.
5. UMD: The MAIN Menu provides settings to customize the
UMD
(In-Monitor Display)
text area to show a line of characters, numbers, and/or some symbols.
6. Time Code: The de-embedded time code from the HD/SD-SDI source displays in the
top right corner.
7.
Waveform and Vectorscope: The signal waveform and vectorscope are configurable
in the
MAIN Menu
.

Referring to the circumstance of no sync ( power on):
1.
Will indicate on the top left hand of screen: IN A: NO SYNC
2.
On the bottom of screen will UMD and METER be shown, but the display of
Audio Meters
UMD
Input Signal
format
Time Code
Safe Marker
Waveform or Vectorscope LED Tally Light
OSD Tally