RMD4342 LCD MONITOR User Manual
—
8
—
The different apparatus model includes different user menu items.
The options are as follows. (The underlined value means the DEFAULT value.)
Display (Viewing Area) :
4.3”
MODEL
BUTTON ITEM
RMD4342-V
RMD4342-SC
RMD4342-HSC
USER
SD ASPECT*
SAFE MARKER
AREA MARKER
OSD CONTROL
SCAN
H/V DELAY
SD ASPECT*
WFM DISP
SAFE MARKER
AREA MARKER
OSD CONTROL
MON SOURCE
H/V DELAY
SCAN
SD ASPECT*
WFM DISP
SAFE MARKER
AREA MARKER
OSD CONTROL
MON SOURCE
SCAN
And each option will be specified as follows.
H/V DELAY
：
H/V, V, H, OFF. Function: horizontal/vertical blank, vertical blank, horizontal
blank, or no blank.
SD ASPECT:
Change the aspect ratio of the picture between 4:3 and 16:9. Only used for CVBS
and SD-SDI input signal. (For more information, please refer to Chapter 5.6)
WFM DISP:
It is used to check the waveform / VECTOR of the current signal picture, showing
on the top-right of the screen. Include three options of WFM, VECTOR, OFF.
SAFE MARKER:
Display CENTER mark, 90% mark and 80% mark or not.
AREA MARKER:
Images show with one scale of 2.35:1, 1.85:1, 15:9, 14:9, 13:9, 4:3 or OFF.
Only when ASPECT is at 16:9, the setting is available.
OSD CONTROL:
Display waveform / VECTOR / TC code, UMD code and audio meter or not.
MON SOURCE:
Monitor one audio source of four audio sources. Include four options of MET1,
MET2, MET3 and MET4. When MET1 is selected, the first audio source will be monitored.
Likewise, if you select other MET, the corresponding audio source will be monitored.
SCAN:
Press to display the 100% image (UNDER SCAN) and 95% (NORMAL) image.
Note:
Please set “USER1” to meet your actual requirement. For example, if you often use H/V
DELAY, you’d better set “USER1” at H/V DELAY.
4.3.3 MENU BUTTON
When you want to change the value of a parameter, you may use MENU, and you can follow four
steps.
Step 1:
Press MENU, and you can enter the main MENU.
Summary of Contents for RMD4342-HSC
Page 1: ...RMD4342 USER MANUAL ...
