27
4.4 Cleaning Of Gold Plated Surfaces
Take special care and
DO NOT
use chemical or abrasive cleaners. Wipe only with a soft damp
cotton cloth to maintain original brilliance.
CAUTION:
Vigorous wiping may damage the gold finish.
4.5 Burner & Pilot Cleaning
Periodic cleaning is necessary for proper operation.
Refer to section 4.8, remove the burner, and check that the burner orifice is clean.
Visually inspect the pilot. Brush or blow away any dust, lint or foreign debris. If the pilot orifice is
plugged, disassembly may be required to remove any foreign material from the orifice or tubing.
When the appliance is back in service, check the pilot flame pattern with the figures in Section 3.3.7.
For re-lighting, refer to the lighting instructions in Section 2.2.
4.6 Optional Fan Installation
See instructions which are included with optional fan kit.
Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause
improper and dangerous operation. Verify proper operation after servicing.
