OSBRiDGE 5GXi, Configuration Manual

Page: 24 / 32

13. Services
Site Survey – Allows to see other Access Points in range.
Reset Default – Allows to reset device to factory default settings.
Traceroute – This command is used to determine the route taken by packets across an IP
network.
Ping – This command is used to to test whether a particular host is reachable across an IP
network. Ping works by sending ICMP “echo request” packets to the target host and listening for
ICMP “echo response” replies. Using interval timing and response rate, ping estimates the
round-trip time and packet loss rate between hosts.