OSBRiDGE 5GXi, Configuration Manual

Page: 14 / 32

6. QOS Settings
When the device operates as Access Point the built-in traffic shaper allows you to set up
different data flow speeds for it’s clients –
In IP Bridge Mode - based on MAC Address,
In IP Router Mode - based on IP Address or IP Subnetwork.
Downlink – In Access Point mode this is speed of the data going out of the wireless interface.
In Access Point Client mode is speed of the data going out of the wired interface.
Uplink –In Access Point mode this is speed of the data going out of the wired interface. In
Access Point Client mode is speed of the data going out of the wireless interface.
Total Downlink Speed - Cumultative speed the data can flow through the device.
Total Uplink Speed - Cumultative speed the data can flow through the device.
High Priority Traffic - Size that will be reserved for high priority queue and sent before any
other traffic. High Priority traffic is defined as traffic from VOIP applications and other types of
applications requiring low latency for correct operation.