1. Purpose
The wireless socket “Socket-R” (hereinafter referred to as the “socket”) is designed for switch-
ing the load in a single-phase 100-240VAC by the commands of the Lun-R receiver that is con-
nected to the Lun control panel (more about for compatibility, see the documentation of the rele-
vant control panel).
Product is not equipped with built-in cameras and microphones, devices and units for
hidden video and audio recording.
2. Safety Precautions
Only the employees, familiar with the module design, instructed on the safety arrangements
shall be allowed to install, routinely maintain and repair.
The device hasn’t an open live parts, representing the danger of electric shock to a per-
son.
3. Technical specifications
The socket technical characteristics is shown in the Table 1.
Table 1. Technical characteristics
Characteristic
Value
Operating frequency range (depends of modification), MHz
433.05…434.79 or
868.70…869.20
Power radiated by the transmitter, mW
up to 10
The health test signals period, seconds
60
Maximum switching current for resistive load, A
7
Mains supply voltage for load (50Hz), V
85…305
Mains supply voltage (50Hz), V
85…305
Power consumption from the mains supply, VA
1.5
Degree of protection provided by enclosure
IP30
Dimensions, mm
105*60*84
Weight, g
200
Relay-R
Version en_2
3
