Dorsopull74 and Lumbopull corset
Open the corset (make sure that the tensioning straps are pulled out to their
full length) and secure the Velcro
®
end pieces of the corset and back brace
temporarily to the sides (fig. A).
The shoulder straps of the brace are put on in a similar way to
the carry straps of a rucksack (fig. B).
Put on the corset and use the middle Velcro
®
closure to fasten securely (fig. C).
Note: Pull the corset tight.
Ensure that the central Velcro
®
closure is positioned in the middle.
Tension the corset by pulling on the strap-pulley system using the
designated Velcro
®
closure ends and secure these to the front adhesive
surface using Velcro
®
(fig. D).
Close the shoulder straps. To do this, pull the straps outwards
and secure to the adhesive surface on the front.
P U T T I N G O N T H E A P P L I A N C E F O R T H E P A T I E N T
1
2
3
4
5
6
English
A
B
D
C
English
