Lumbopull70/72
(First time only) If prescribed by the doctor, attach the rigid lumbar pad
to the inside of the middle rear of the corset using the Velcro
®
closure (fig. A).
Open the corset (make sure that the tensioning straps are pulled out to their
full length) and secure the Velcro
®
end pieces temporarily to the sides (fig. B).
Position the corset in such a way that the label on the inside points upwards
and, when putting on, use the centre Velcro
®
closure to fasten securely (fig. C).
Note: Pull the corset tight.
Ensure that the central Velcro
®
closure is positioned in the middle.
Tension the corset by pulling on the strap-pulley system using the
designated Velcro
®
closure ends (fig. D) and secure these to the
front adhesive surface using the Velcro
®
(fig. E).
P U T T I N G O N T H E A P P L I A N C E F O R T H E P A T I E N T
English
1
2
3
4
5
E
A
B
D
C
English
