PREPARATION AND SETUP
PREPARATION AND SETUP
Right rear combo lights
Left rear combo lights
Logic module
7 pin connector
Right front
amber light
LIGHT KIT COMPONENT IDENTIFICATION
An un-assembled light kit will come with 1tRIPr
®
XD. The light kit will come in a box that has Orthman manufactured components in it, as well as an ag light kit
from COBO light company. Below is an example of what will typically be found in a light kit.
For installation instructions, refer to the 1tRIPr
®
XD pre-delivery
manual.
Amber light
right bracket
Amber light
left bracket
Courtesy
Palette and
bracket
Left front amber
light
Right rear light bracket
left rear light bracket
3 - 5
CARRIER
COMPONENT IDENTIFICATION
3
2
1
7
6
5
4
NOTE:
Right and left as illustrated above and referenced from this point on, is determined by facing the same direction the toolbar will travel while
in use.
1. FRAME CONNECTION PLATE.
Area of connection between toolbar stringers and carrier lift arms.
2. LIFT ARM.
Combines strength and the versatility to raise and lower the machine.
3. HYDRAULIC LIFT CYLINDER.
Lift and lower the machine.
4. WHEEL SPINDLE CONNECTION PLATE.
Area of connection between wheel spindle and carrier.
5. OPTIONAL NURSE TANK HITCH MOUNT.
Allows for the ability to tow a nurse tank for more nutrient application capabilities.
6. SAFETY TRANSPORT LOCK.
When machine is lifted, this bracket is fitted around the hydraulic cylinder rod to prevent machine from
making ground contact if a rare instance of hydraulic failure occurs.
7. CARRIER ARM LIFT HANDLE.
Handle designed to ease the assembly of the machine by provided a point to mount lifitng devices.
8. CARRIER WHEELS.
Available in sizes 14.9R46 and 480/80R50.
9. 14.9R46 WHEELSPINDLE.
Spindles used in conjunction with 14.9R46 size tires.
10. 480/80R50 WHEEL SPINDLE.
Spindles used in conjuntion with 480/80R50 size tires.
8
9
10
RIG
HT
LEF
T
DIRE
CTIO
N OF T
RAV
EL
3 - 4