manualshive.com logo in svg

Orthman 125-082-01-EN-OM, Operator'S Manual, Page: 4 / 86

Share
Download
Orthman 125-082-01-EN-OM Operator'S Manual Download Page 4

1TRIPR II Row Units OM-EN 

TOC-ii

Preparation and Setup

Shipping Configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Preparing the 1tRIPr® II Row Unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Implement-to-Tractor Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Tooling Options   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Individual Row Units  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Mounting Row Unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Row Unit Set-Back Clamp   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Mounting Set-Back Clamp   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Rolling Basket Assembly   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

Rolling Basket Assembly Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

Tillage Shank   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Shallow Tillage Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Liquid Fertilizer Mole Shank Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Mole Knife Assembly   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
AA Knife Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
Dry Mole Shank Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

Air Diffuser Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
Tillage Shank Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
Mole Shank Assembly Fertilizer Tube Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
Mole Knife Assembly Fertilizer Tube Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
Dry Mole Shank Assembly Fertilizer Tube and Dry Boot Installation  . . . . . . . . . . . . . . . . . . . 4-15
Mole Shank Shin Cap Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
Automatic Reset (AR) Trip Linkage Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17

Operation and Field Settings

Toolbar Height and Orientation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Row Unit Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Field Adjustments  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Row Unit Down Pressure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Row Unit Down Pressure Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Row Cleaner Assembly Depth  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Row Cleaner Assembly Width   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Fore and Aft Adjustment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Rigid Row Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

Floating Row Cleaner   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

Rolling Basket Down Pressure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

Rolling Basket Down Pressure Adjustment   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

Tillage Shank Assembly Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12

Tillage Shank Assembly Depth Adjustment   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12
Tillage Shank Depth Adjustment Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12

Wavy Coulter Assembly Depth and Width  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14

Wavy Coulter Assembly Depth Adjustment   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14
Wavy Coulter Assembly Width Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15

Wavy Coulter Assembly Fore and Aft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16

Adjustable Liquid Tubes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18
Adjustable Dry Fertilizer Boot on Dry Mole Shank  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19
Shear Bolt Protected Tail  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20
Automatic Reset (AR) Trip Linkage   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21

Summary of Contents for 125-082-01-EN-OM























































































Reviews:

No comments