background image

 

 

 

  4

 

PeerCall User’s Manual

 

message 

Enter ID 0-9

 will be displayed.  User can then enter the one digit 

memory ID (0-9); the ten-digit phone number will be stored to the Phone Book and 
displayed on the screen. 

Press <OK> to start calling.  Press <Exit> or hang up the hook put the PeerCall 
back to 

Standby

 mode. 

Please note, the number will be stored to the server immediately once entered 

completely.  In case the link was disconnected, this number will be dropped.  
The message 

Not Ready...

 indicates the PeerCall is off-line (please refer to 

section 

2.1

).  In that case, please follow instructions above and try again. 

2.4.2  Retrieve a phone number from the Phone book 

In 

Standby

 mode, the user is able to select a phone number from the Phone book 

by holding down the memory ID (0-9, a digit number) for more than two seconds.  
The phone number for the selected memory ID will be displayed. 

Press <OK> to start calling.  Pressing <Exit> or hanging up the Handset will put the 
PeerCall back to 

Standby

 mode. 

3.  Answer a Call 

When someone is calling, the 

buzzer will ring

 and the display will show the Caller’s ID

 

number, e.g. 

111-666-8888

.  Just pick up the Handset or press <OK> to answer the call. 

The display will show 

Talking...

, the incoming (

) icons will be on, the current time, 

hh:mm mo/dy and the elapsed time ee (in minutes) will be displayed. 

During the conversation, if the caller hangs up the Handset or presses <Exit>, the 
message 

End of Talk

 will be displayed for two seconds, the PeerCall will then be put 

back in 

Standby

 mode.  If the link was disconnected due to transmission difficulties (for 

more than eight seconds), the message 

Disconnected

 will be displayed. 

4. Voice Message 

4.1  Record a Voice Message 

4.1.1 

If the Voice Message box is full, you will hear the 

Busy Tone

 and the display will 

show 

Msg Box Full

 with a 

warning (Buzzer) sound

The user can hang up the Handset or press <Exit> button to put PeerCall back to 

Standby

 mode. 

4.1.2 

If the Voice Message box is available, the user will hear a Greeting Message pre-

recorded by the receiver.  The display will show 

Greeting...

 in the meantime.  In 

case the receiver has not pre-recorded a Greeting Message, the user will hear the 
default Greeting Message instead: 

 

Hi, I’m not available at this moment.  Please leave your message after the beep.

 

4.1.3 

The caller can leave a message after hearing a 

beep

There is a 30 second timer counting down while the text displays 

Recording... 

4.1.4 

The recording will end either when the caller hangs up the phone, presses the 

<Exit> button, or the 30 second timer is up with a 

warning (buzzer) sound

.  The  

PeerCall will then go back to 

Standby

 mode. 

Summary of Contents for PeerCall 100













Reviews: