www.ortechindustries.com
4
INSTALLATION
This section provides step-by-step instructions for installation of your fireplace.
WARNING
The socket must be 15A/125V.
1. This fireplace is designed to be hung on solid walls or inserted into a wall hole after proper construction.
Select a suitable location, which is not susceptible to moisture, or dust and is away from high traffic and
things that may catch fire or block openings such as drapes, furniture, etc.
2. The fireplace
must be installed at a suitable position where at least 50cm above the floor and no higher
than 180cm.
NOTE
It is a good idea to place your fireplace near an existing outlet, for ease of electrical hook up.
3. There are 4 keyholes on the back side of the
heater
casing. Drill 4 holes according to the position of the 4
keyholes. Then insert 4
expansion bolts
。
Use strong screws to fix it on the wall leaving the screw
protruding approximately 8 mm in order to hang the box onto them.
CAUTION
Store your fireplace insert in a dry, safe and dustless place when placing the mantel or
building the wall construction.
