www.ortechindustries.com
7
MAINTENANCE
WARNING
Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electric
shock to persons or damage.
Light Bulb Replacement
Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity
and detail of the log exterior disappears. There are two bulbs under the log set.
WARNING
Allow at least 5 minutes for light bulbs to cool off before touching bulbs to avoid burns.
I. Bulb Requirements
Quantity of 3 clear chandelier or candelabra bulbs with an E-12small socket base, rating voltage 125
volts, rating power 40 watts (OD-100G: 5 bulbs).
CAUTION
Do not exceed 40 watts per bulb
II. Operation
1. Remove the glass faceplate by lifting it off the 4 points (A, B, C, D), please see below figure
2. To open the light bulb area:
Hold the left and right side of the cover of light bulbs at the bottom of your firebox and pull bottom
straight out. You can see two bulbs in the firebox (see below figure):
3. Examine the bulbs to determine which bulb requires replacement.
4. Remove old bulbs and replace a new one. Hold the socket while unscrewing or screwing bulbs in
order to prevent damage to the lamps.
5. Replace the cover of light bulbs.
