background image

www.ortechindustries.com 
 

IMPORTANT INSTRUCTIONS 

WARNING 

You should read and always follow the important instructions below to reduce the risk of fire, electric 
shock, and injury to persons. 

1.  Read all instructions before using this fireplace. 
2.  This fireplace is hot when in use. To avoid burns, do not touch hot surfaces which are located near the 

heater  outlet  or  light  bulbs.  The  grill  directly  in  front  of  the  heater  outlet  becomes  hot  during  heater 
operation.  Keep  combustible  materials,  such  as  clothes,  pillows,  furniture,  bedding,  papers  and 
curtains at least 3 feet from the front of the unit. Do not cover or block heater outlet or any ventilation 
or exhaust opening at any time. Do not use on soft surfaces where openings may become blocked. 

3.  Do  not  install  the

 

fireplace  directly  on  carpet  or  any  soft  surface,  which  may  restrict  air  circulation 

beneath the unit. 

4.  Always unplug fireplace when not in use. 
5.  To disconnect fireplace, turn controls to off, then remove plug from outlet. 
6.  Do not use outdoors. 
7.  This  fireplace

 

is  not  intended  for  use  in  wet  locations,  such  as  bathrooms,  laundry  areas  and  similar 

indoor locations. Never locate fireplace

 

where it may come into contact with water. 

8.  Do not operate the fireplace with a damaged cord or plug, or if the fireplace has malfunctioned, or if the 

fireplace  has  been  dropped  or  damaged  in  any  manner.  Return  fireplace  to  authorized  service  for 
examination, adjustment or repair. 

9.  Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or the like. Arrange cord 

away from traffic area and where it will not be tripped over. 

10.  Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an 

electric shock or fire, or damage the fireplace. 

11.  To prevent a possible fire, do not block air intakes or exhaust in any manner.  
12.  All  electrical  heaters  have  hot  and  arcing  or  sparking  parts  inside.  Do  not  use  it  in  areas  where 

gasoline, paint, or flammable liquids are used or stored or where the unit will be exposed to flammable 
vapours. 

13.  Do not modify this fireplace. Use it only as described in this manual. Any other use not recommended 

by the manufacturer may cause fire, electric shock or injury to persons. 

14.  Do not install this fireplace with an extension cord. 
15.  Do not burn wood or other materials in this fireplace. 
16.  Do not strike the fireplace glass. 
17.  Always use a certified electrician should new circuits or outlet be required. 
18.  Always use properly grounded, fused and polarized outlets. 
19.  Always use ground fault protection where required by electrical code. 
20.  Always disconnect power before performing any cleaning, maintenance or relocation of the fireplace. 
21.  When transporting or storing the fireplace

 

and cord, keep in a dry place, free from excessive vibration 

and store so as to avoid damage. 

22.  If  the  supply  cord  is  damaged,  it  must  be  replaced  by  a  special  cord  or  assembly  available  from  the 

manufacturer or its service agent . 

23.  The

 

fireplace

 

must not be located immediately below a socket-out. 

24.  WARNING: In order to avoid overheating, do not cover the heater. 
25.  This appliance is not intended for use by persons (including children) with reduced physical, sensory or 

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person responsible for their safety. 

26.  indoor and household use only 
27. 

CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must 
not be supplied through an external switching device, such as a timer, or connected to a circuit that is 
regularly switched on and off by the utility

Summary of Contents for OD-100G









Reviews: