ORQA FPV.ONE, User Manual

Page: 22 / 30

right-hand joystick to confirm and save. Note that this setting also
adjusts the recorded audio volume of the AV-in input.
If you try to start the DVR recording or formatting the SD card without the
SD card inserted, the “NO SD CARD” message will be displayed.
Format SD Card is used to fast format the inserted micro SD card to the
corresponding FAT system. The system can manage SD Cards up to 2TB.
Auto DVR
Auto record feature enables you to automatically record your DVR footage
after getting video signal on your goggles. There must be some sort of video
signal (HDMI, Av in or Receiver) for the recording to start.To stop DVR
recording and save the file you can press the DVR button, but, if there is still
video signal left, the Auto DVR will start again in 2 seconds.
We do not recommend using ALWAYS ON power option because when
plugging the battery out during the AUTO DVR recording, the file becomes
corrupted (and it will be deleted on the next boot up).
Entering the menu stops DVR recording, exiting the menu will start auto DVR
recording after 2 seconds.
The SD card must be inside and if there is a video signal at the moment of
inserting the SD card it will start again after a few seconds.
22
Orqa FPV.ONE User Manual, Rev.1.6
©2020. Orqa Ltd.