ORQA FPV.ONE, User Manual

Page: 14 / 30

FEATURES
FPV.ONE goggles are equipped with various features and settings for a
better overall user experience.
The ​HEAD TRACKER feature uses goggles’ integrated IMU to track the
movement of the pilots’ head. This feature requires the IMU to be reset
every time this feature is used. This is achieved by scrolling to the "SET ZERO
POINT" and by depressing the left-hand joystick .
If the camera on the aircraft starts to drift (IMU was not calibrated), press
the “​SET ZERO POINT​” again.
For quick ZERO POINT setup, long press the Battery check button.
The ​HEAD TILT ALARM is used to help the pilots aim the directional antenna.
Especially long-range pilots need to keep the antenna pointed exactly in the
direction of their aircraft to achieve greater distances. This feature is also
helpful for the pilots who tends to drop their head while flying.
To set this feature change the setting in the menu to ON. The angle is set
both up and down from set zero point. The angle value can be set between
15° and 45°. If the pilot’s head tilts up or down more than the set angle the
beeping sound will be heard.
14
Orqa FPV.ONE User Manual, Rev.1.6
©2020. Orqa Ltd.