Orolia Seven Solutions WR-ZEN Series, User Manual

Page: 75 / 167

Note: The CLI tool allows to modify and save all the parameters listed in
"IEEE 1588 configuration with/without license" on page 63 even without
license. However, they will not be Applied/Loaded until the PTP license is
validated.
5.4.2 Configuration
Note: Master/Slave port configuration: The role of the port is given by the
Preset ( "Presets" on page 49 ) and cannot be modified directly from the
PTPv2 configuration tab. The section "Custom" on page 52 should be read
in case the user needs to modify the role for a specific port.
Note: PTP provides many options to support a wide range of applications.
Then, the PTP profiles restrain some specific settings in order to limit com-
patibility to only a subset of PTP. The user should thus consider these
restrictions when configuring PTP for a specific profile.
The parameters associated to PTP are listed below:
OID Name Value Type Description
19.xx13.x net/<iface>/1/cfg Configuration of the corresponding
<iface> port instance
.
19.xx13.8 Profile 0. Default
1. Custom
2. Telecom
8275.1
3. Telecom
8265.1
4. C37.238-
2011 Power Profile selected (Default, telecom...) with a set of
options pre-configured.
19.xx13.9 Transport Pro-
tocol 5. Layer 2
6. UDP/IPv4 Define the network layer that delivers the PTP pack-
ets.
19.xx13.10 Delay Mech-
anism 0. E2E
1. P2P Path delay measuring mechanism used by the PTP
Port {E2E (End to End delay request-response mech-
anism), P2P (Peer to Peer delay mechanism) }.
19.xx13.14 Domain <Integer> [0-
255] Default: 0 Domain number associated to the PTP transactions.
Several domains can work simultaneously. PTP pro-
files can restrict the value of domain number (i.e.,
8275.1)
5.4 IEEE 1588-2008 (PTPv2)
CHAPTER
5
•
WR-Z16 User Manual Rev. v3.4 65