9
Disabling the keyboard backlight
42
0 #
Activating the keyboard backlight
1 #
Automatic keyboard backlighting at the
press of a button
2 # (factory default)
LED off during sleep mode
43
0 #
LED blinks during sleep mode
1 # (factory default)
Notes:
1. The master code can be between 6 and 8 digits, the factory setting is 999 999.
2. The user ID number must be 4 digits long, the card number can be 6 to 8 digits long.
3. The PIN code is any combination of numbers consisting of 4-6 digits (excluding code 1234 which is reserved).
4. When registering the first user, the device will automatically generate PIN 1234 (PIN 1234 is not an access code for door opening).
5. If you enter an incorrect master code, the device will lock for 5 seconds and then return to standby mode. Enter the correct main code again. After entering the
correct code, the device will return to standby after 30 seconds.
6. When entering codes on the keypad, the "#" symbol means confirmation of the digits entered, when adding or removing new user cards "#" means confirmation of
adding or removing a user, while "*" means exit from the programming mode.
7. When adding a series of cards, the device automatically assigns a user ID and card number (this is the first free value), each subsequent card is the next free ID and
card number and so on until a certain number of cards have been added.
8. Please note that by resetting the device all settings will return to the factory settings.
9. When registering users in Zone 1, the LED on the device will light green, when registering Zone 2 users, the LED on the device will blink green.
Wiring connection
Color
Functions
Description
Red
DC+
12VDC Input power
Black
GND
Negative supply pole
Yellow
OPEN1
Door request button 1 (other end connected to GND)
Blue
NO1
Door relay 1 NO contact (potential free)
Purple
COM1
Common contact for door open relay 1 (potential free)
Orange
NC1
Door relay 1 NC contact (potential free)
Grey
OPEN2
Door request button 2 (other end connected to GND)
White
NO2
Door relay 2 NO contact (potential free)
Brown
COM2
Common contact for door open relay 2 (potential free)
Green
NC2
Door relay 2 NC contact (potential free)
Pink
Doorbell A
Doorbell A connection
Pink
Doorbell B
Doorbell B connection
Sound and light indication
Operation status
Red light
Green light
Orange light
Buzzer
Standby
blink
-
-
-
Pressing the button
-
-
-
Di
Read the card
-
Light up
-
Di-
Door 1 opening
-
Light up
-
Di-
Door 2 opening
-
blink
-
Di-
Success of operations
-
Light up
-
Di-
Failure of the operation
-
-
-
DiDiDi
PIN entering
Light up
-
-
-
PIN code & card reading
Light up
-
-
-
Multiple card reading
Light up
-
-
-
Menu entering
Light up
-
-
-
Settings entering
-
-
Light up
-
Main card reading
-
-
Light up
DiDi
Exit programming mode
blink
-
-
Di-
Detailed programming manual
Administrator settings
Change the main code
* Main code #
00
New code # New code #
The main code may contain from 6 to 8 digits. Factory setting: 999 999
Entering the administrator "add card"
01
Read Add Card
Entering the administrator "delete
card"
02
Read Delete Card
Delete all users
07
0000 #
Note: All Zone 1 and Zone 2 users will be deleted.
Opening of lock 1 by the administrator
51
Opening of lock 2 by the administrator
52
User settings
–
Zone 1
Adding card user
* Main code #
11
Read card # or
User ID number # Read card # or
