background image

1      Weather shield    Affix and protect outdoor camera from rain or snow.

2      IR LEDs               Provides illumination with IR LEDs for better visibility.

3      Camera               Capture image to transmit to display

4      Speaker              Sound from smart-phone

5      Call button           Visitor call for intercommunication

6      Microphone         Transmit voice to smart-phone

8

    

System port

Volume regulator

  

For the models with wired function, connect the doorbell to external 

  switching power supply(DC 12V), ethernet cable and door lock.

  For the models with wireless function, connect the doorbell to external

  switching power supply(DC 12V), door lock and indoor antenna or 

  outdoor antenna, and antenna can be optional.

To be used to adjust the speaker volume.

No.    Name                                           Descriptions

7

7

*  Avoid

 

installation of the device near strong radiation e.g. AC motor and lift.

*  Maintenance should be complied with qualified technician.

*  Avoid hard shake, beating and collision, otherwise the internal exact components 

   maybe be damaged.

*  Do not expose the outdoor camera under strong light or sunshine.

*  Do not install the outdoor camera in the environment e.g. direct sunlight, 

   contact rain, High temperature, high humidity, full of dust and chemistry 

   corrosive.

*  Select the most suitable position where the camera is located at user’s eye level.

*  Switch off power supply before installation.

*  Keep more than 30cm away from AC power supply to avoid external interference.

*  Keep it away from the water and magnetic field.

Please follow these steps as reference:

1.Select the most suitable position where the outdoor camera is located at user’s 
    eye level, then drill 2 holes according the weather shield, embed 2 plastic 
    anchors into the holes.

2.Use a screwdriver to affix the weather shield with the installation screws.

3.Drag the connection cable through the hatch at the bottom side.
4.Embed the outdoor unit into the weather shield and affix with the supplied screws. 

Angle mount and Surface mount

You can install the chime according to 

the following method as below.

Plastic anchors

Power cable

Screws

-

+

DC output

2.5 Feature

5

6

Summary of Contents for OR-VID-IP-1045









Reviews: