10
1.4 Adding numbers by voice call
- to add new user numbers, enter the programming mode by sending a text message:
1234ADD ON
- you will receive a reply back,
- call the SIM card number in the controller from the phone whose number you want to add.
The system will automatically reject the call,
- any number of users can be added until programming mode is exited.
- ALLOW TO ADD USER
NUMBER
- ADD333222111 OK
(assuming the user number
333 222 111)
1.5 Disable adding numbers by voice
call
- to deactivate the programming mode/addition of user numbers, send a text message:
1234ADD OFF
- you will receive a reply back, which means that you will leave the mode of adding user
numbers.
- DISABLE ADDING USER
NUMBER
1.6 Adding numbers by SMS text
message
- It is possible to add up to 8 phone numbers in one SMS command:
1234AD111111111#222222222#333333333#444444444#subsequent telephone numbers#
(where numbers are consecutive phone numbers that we want to add)
- you will receive a reply back, which means that the phone numbers have been added correctly
- SET OK
1.7 Deleting numbers by SMS text
message
- It is possible to delete up to 8 phone numbers in one SMS command:
1234DD111111111#222222222#333333333#444444444#subsequent telephone numbers#
(where numbers are consecutive phone numbers that we want to add)
- you will receive a reply back, which means that the phone numbers have been correctly
deleted
- DELETED
1.8 Deleting all numbers by SMS text
message
- It is possible to delete all phone numbers with one SMS command:
1234FD
- you will receive a reply back, which means that all numbers will be deleted from the list.
- FD OK
2. Limitation of access for any
caller number
(a maximum of 250 accesses per
phone number can be set)
- It is possible for the administrator to restrict access of any the caller id numbers up to 250
times
Example:
To restrict the number 07847170001 to access the system for only 14 times you would send the
following SMS command as:
1234LIMIT07847170001*014#
- the system sends a reply message, which means that 14 times access will be established for a
given telephone number
- SET OK.
3. Enable/disable feedback to the
Administrator
- to enable SMS alerts for the Administrator, send a text message:
1234SMS1#
- you will receive a reply back,
- to disable SMS alerts for the Administrator, send a text message:
1234SMS0#
- you will receive a reply back.
- SET OK.
- SET OK.
4. Access for all phone numbers
- To enable access for phone numbers configured in the device and for any phone number
without restrictions, send an SMS with the following content by the Administrator:
1234ATH0#
- you will receive a reply back.
- ANY CALLER ID
4.1 Access for a restricted list of
phone numbers
- To enable access for phone numbers configured in the device, send an SMS with the following
content by the Administrator:
1234ATH1#
- you will receive a reply back.
- AUTHORIZATION
CALLER ID
5. Working mode settings
5.1 Activation of A-mode - timer
- MODE A is the factory default function and allows any authorized caller to activate relay 1
from 1 second up to 65000.
(when programming this function, it is possible to decide whether or not to receive SMS
notifications)
The default setting is:
A-mode with the relay 1 latching time set at 3 seconds and the SMS confirmations are disabled.
Example:
1. To program mode A with the relay 1 latching time as 60 seconds and enable the SMS confirmation
function send an SMS command:
1234MA60#1
- the system will send you a reply message
2. To program mode A with the relay 1 latching time as 1 seconds and disable the SMS confirmation
function send an SMS command:
1234MA1#0
- the system will send you a reply message
Important: Once you have finished setting the mode, you can control it using GSM voice call
or via SMS text message:
- send an SMS command:
ON1
- the system will send you a reply message.
- SET MODE OK.
- SET MODE OK.
- OFF1
5.2 Activation of B-mode - Bistable
on/off operation
- MODE B allows the caller to activate relay 1 on/off with alternative telephone calls
(when programming this function, it is possible to decide whether or not to receive SMS
notifications)
Example:
1. To program MODE B and enable the SMS confirmation function send an SMS command:
1234MB1#
- the system will send a reply message and the caller will receive an SMS confirmation each
time relay 1 is switched on and off.
2. To program MODE B and disable the SMS confirmation function send an SMS command:
1234MB0#
- the system will send you a reply message
Important: Once you have finished setting the mode, you can control it using GSM voice call
or via SMS text message:
- send an SMS command:
ON1 lub OFF1
- the system will send you a reply message.
- SET MODE OK.
- SET MODE OK.
- OUT1ON
- OUT1OFF
6. Activation of E-mode –
Combined timer
- Mode E enables control of opening time of relay 1 by short SMS codes
Example:
1. To set up a timed preset latching time of 3600 seconds for relay 1 send an SMS command:
1234ME3600#1
- the system will send you a reply message, then to activate relay 1 for 3600 seconds you need
to send a short code as:
ON1
- the system will send a reply message, which means that relay 1 will be open for 3600 seconds
- SET OK
- OUT1 ON
