6.
Insert the fuse holder carriage in its compartment by
pulling it inward.
Before inserting the fuse holder carriage in the fuse
protection cubicle, ensure that both the carriage
as well as the inside of the fuse holder are properly
cleaned.
Figure 7.49.
Inserting the fuse holder carriage
7.
Reset the fuse striker by pressing downward with the
thumb.
Figure 7.50.
Resetting the striker in the fuse holder cover
IG-196-US version 03; 13/04/2021
48
Operation and commissioning sequence
General instructions
cpg
.0 NEW MODEL: Medium-voltage
metal-enclosed switchgear with full insulation in gas,
up to 38 kV in accordance with IEEE Standards
Summary of Contents for cpg.0-c
Page 59: ......
