6. Installation
6.1. Unpacking the equipment
The
cpg
.0 switchgear is supplied protected with a plastic
cover.
On receiving the equipment, check that the goods
supplied correspond to the order and associated
documentation. If this is not the case, contact
Ormazabal
immediately.
The disassembly process for the equipment is as follows:
1.
Using a blade, cutter or similar tool, cut the cellophane
the cubicle is wrapped in.
2.
Remove the cellophane.
3.
Detach the white polystyrene corner pieces.
4.
Unscrew the fixings between the base and the pallet.
5.
Dispose of any waste in an environmentally-friendly
manner.
It is advisable to make a visual inspection of the equipment
to check whether it has suffered any damage in transit. If
damaged, contact
Ormazabal
immediately.
6.2. List of assembly material supplied
Along with the
cpg
.0 switchgear a box is supplied with all
the material necessary for installation and correct operation.
Depending on the cubicles which form part of the supply,
the assembly materials delivered will be some of the
following:
1.
Spring charging and actuating levers.
2.
Interconnection busbars and busbar compartment
enclosure elements.
3.
Grounding bars.
4.
Decorative sides.
5.
Medium voltage fuse-links (where applicable).
6.
Necessary nuts and bolts.
7.
Alcohol and paper roll.
Ensure the box contains the elements indicated in the
materials list provided with the supply. If it does not,
contact
Ormazabal
.
IG-196-US version 03; 13/04/2021
18
Installation
General instructions
cpg
.0 NEW MODEL: Medium-voltage
metal-enclosed switchgear with full insulation in gas,
up to 38 kV in accordance with IEEE Standards
Summary of Contents for cpg.0-c
Page 59: ......
