Orlit ROVER RT TTL, User Manual, Page: 4 / 20

4
For Your Safety
Please do not put the Rover RT TTL in an environment where flammable
liquid is likely to come into contact with this product.
Do not use the strobe unit in the presence of flammable gases,
chemicals and other similar materials. In certain circumstances, these
materials may be sensitive to the strong light emitting from this strobe
unit and fire may result.
This product contains high-voltage electronic parts. Touching the high-
voltage circuit inside it may result in electric shock. Do not disassemble.
Should repairs become necessary, this product must be sent to an
authorized maintenance center. Please do not attempt repairs to your
lighting equipment personally.
Always keep this product dry. Do not use in rain or in damp conditions.
Please dry your hands before handling the equipment, as wet hand are
dangerous to both the equipment and to you.
Please do not touch the flash tube or modeling lamp with bare hand.
Do not use any power supply other than the included one to charge the
battery. Please do not use the flash while the battery is connected to the
charger.
Please do not plug the charger in until after you have connected it to
the battery.
Do not insert metal parts into any lighting equipment, except the special
umbrella channel. Please ensure that you have firmly tightened the
handle on the umbrella bracket before using it to support the unit.
Please do not fire the strobe at very close distance to people, pets or
items, as the strobe releases intense heat and can cause damage and
serious injury.
This strobe has an over-heat protection circuit, rapid continuous firing
will cause the strobe to slow operation and trigger a “cool down” period.
After this period, the strobe will resume normal operation. You may also
reboot the strobe by cycling the power off and then on.
The strobe has a locking pin to ensure secure operation. To avoid
damage, slide the release before removing any reflectors or accessories.
In case of abnormal function, sparks, excessive heat, flames or smoke,
immediately power off the unit and disconnect the battery if possible.
Have it checked by an authorized technician.