Orlit ROVER RT TTL, User Manual, Page: 10 / 20

10
Orlit Rover RT TTL Operation
Power on/off
Switch on: Long press on the POWER button [9]
The LCD screen lights up and enters the operation interface.
Switch off: Long press on the POWER button [9]
LCD screen turns off.
The Orlit Rover RT TTL
can operate in two modes to satisfy the
photographers’ different demands and preferences.
TTL MODE
(1) Press the 1st Function [Menu] button (10) and switch to MENU1.
Press the 4th Function button for selection of wireless channel to
TTL-C (Canon), TTL-N (Nikon) TTL-S (Sony), or TTL-F (Fujifilm).
(2) Press the 2nd Function [Mode] button (10) and switch to TTL mode.
(3) Press the 3rd Function [Sync] button to choose the sync
mode: Normal [NOR] mode or HSS high speed sync mode.
(4) Press the 1st Function button [10] and switch to MENU2 to set up
CH (channel) and GR (Group). The value must be the same as the
remote trigger transmitter device.
(5) Press the 1st Function button [10] and switch to MENU3.
(6) Press the 2nd Function button [10] to control the Recycle Beep.
(7) Short press the Modeling Lamp button [9] to control the
modeling lamp.
(8) The TTL EV adjustment range is -3.0EV ~ +3.0EV. For 1/10 f-stop
increments: Turn the Power output knob [11] directly to change the
power. For 1 f-stop increments: Long press the Power output knob
[11]. The power value becomes green. Turn the knob to change the
power in full stops.