Orlanski ORLAN SUPER 130 kW, Instruction Manual & Service Manual

Page: 18 / 35

11
ATTENTION!
It is necessary to use cleaning mechanism levers that are positioned on both sides of
boiler each time after stoking the boiler, otherwise pitch may clogged turbulators that
affects boiler efficiency and boiler lifespan.
ATTENTION!
To avoid accumulation of ash in bottom chamber especially at the back side below
heat exchanger pipes, it is necessary to remove the ash with boiler tools.
Pic.5 Boiler tools.
6.3. Boiler tightness.
It is important to assure boiler tightness, mostly door tightness. Leaks cause that exhaust gases
escape to boiler room but most importantly it may leads to uncontrolled burning in the boiler. To
assure door tightness, rope of upper must be greased at least once a 3 weeks, if finally rope stays
hard – it must be replaced. Rope in bottom door must be greased ( at least once a month) with oil
or graphite grease.
To adjust boiler door one should
a) Remove the door
b) Loosen screw
c) Rotate both hinges 360°
d) Screw up the nut.
ATTENTION!
Door adjustment needs to be done on both hinges!
blocking nut