Orlanski ORLAN SUPER 130 kW, Instruction Manual & Service Manual

Page: 24 / 35

2.2. EKOSTER 2 – installation recommendations
1. Controller is adjusted to cooperate with solid fuel boilers.
2. Controller must be installed by qualified person.
3. Controller cannot work at temperatures higher than 40°C.
4. Controller should be protected against water flooding and steam condensation.
5. Controller should be installed and used according to handling rules with electric equipment.
6. Fuse burning as a result of wrong pump connection is not considered as a warranty matter.
7. It is recommended to check controller’s settings before lightning up of the boiler.
8. Controller is equipped with two 3,15 A fuses
17
Pic.2 Ekoster 2 – back panel view.
3,15 3,15
ATTENTION!
It is necessary to unplug controller when pump wires connection or fuse replacement.