16
4 -
Now record a new song in Track 3 in the same way. If you want to store in Track 3 a
third part of the same song, press Track 1 first, Track 2 afterwards and than Track 3.
Track 1 and Track 2 will be in Play mode and Track 3 will be in Record mode.
5 -
At the end of recording of Track 3, switch Track 1, Track 2 and Track 3 Off to end
recording.
6 -
To play back all Tracks simultaneously switch them all on and press the PLAY
button.
NOTE -
When a Track is recorded and stored it is necessary to allow approximately two
seconds before pressing the PLAY button. This allows internal computer to properly
store the Song Data. The Bass Sound can only be recorded as a single sound and not
as a Split Sound.
METRONOME
The metronome is particularly useful.
There are different Time Signatures available : Mono Click, 2/4, 3/4, 4/4, 5/4 and 6/8.
To select the different Time Signatures:
-
press the SET button. All the programmable features of the instrument will start blinking.
-
press the METRONOME button in the FUNCTIONS section. Its Led will light up.
-
The display will show:
4 - 4
Using the (/\) and (\/) DATA buttons it is possible to change the Metronome time sinature.
To use the METRONOME, push the METRONOME switch, and the pulsed beat selected will be
played though the speakers. The beginning of each measure is indicated more volume. To stop the
METRONOME, push the METRONOME switch again
It is possible to change the tempo speed of the metronome by using the (/\) and (\/) buttons.