Imported by
AIC International, 44980 Ste-Luce-sur-Loire, France
Step 2: Displaying the interfaces
While the screen is in the default display mode, press buttons (
8
) and (
9
) to step through the different
interfaces.
Step 3: Settings (SYSTEM SET)
Press button (
7
) →
System Set
is highlighted → press button (7) to confirm.
Press buttons (
8
) and (
9
) to step through the settings to reach the one you want to adjust → the
setting is highlighted → Press button (
7
) to open that setting for editing.
Adjust the value up or down with buttons (
8
) and (
9
) then press button (
7
) to confirm your choice.
Press button (
10
) to return to the previous list of selections.
Selection of temperature units (Temp Unit): Celsius (°C) or Fahrenheit (°F).
HCHO alarm (Alarm HTL): to set one of three alarm thresholds for the formaldehyde level
(0.100, 0.300, or 0.600 mg/m³).
Delete stored data readings (Clear Log): to delete the measured data points on the graphs
(select “Clean”).
Power saving mode (Off Time): to adjust the delay before the screen switches to standby
mode:
Never or after 30, 60, or 90 minutes.
If a set time is chosen, the tester switches off automatically if that amount of time
elapses without a button being pressed. Press button (7) to exit standby mode: the
countdown begins again.
Interface colours (Style): to set the background colour of certain specific displays.
Language: to select either English or Chinese as the display language.
Brightness: to adjust the screen’s backlight level.
Alarm (Buzzer Set): to activate (Open) / deactivate (Close) the HCHO threshold alarm.
Press button (10) to return to the previous list of selections → Press button (9) to select Time Set →
press button (7) to open that setting.
Clock and calendar adjustment (TIME SET):
Press button (7). Step through the items with buttons (8) and (9).
Y
: for changing the highlighted year (with buttons (8) and (9)) → Press button (7) to confirm
and advance to the next setting
Interface 1
Default display
Interface 2
Interface 3
Interface 4
