1. REMOVAL OF MECHANICAL PARTS
1-3: SPEAKER BOX ASS'Y / REMOCON PCB /
AND P.C. BOARDS
OPERATION PCB (Refer to Fig. 1-3)
1. Remove the 8 screws (1).
CAUTION
2. Remove the Speaker Box Ass'y in the direction of
•
Parts removal shuld be perform in clean room cause
arrow (A).
the unit will be derogate by dust.
3. Disconnect the following connectors :
•
Be careful not to remove the LVDS cable forcibly, because
CD6201 and CD6207).
the LVDS cable may be damaged.
4. Unlock the 2 supports (2).
•
To wear the gloves each time.
5. Remove the Remocon PCB in the direction of arrow (B).
6. Unlock the support (3).
7. Remove the Operation PCB in the direction of arrow (C).
1-1: STAND ASS'Y (Refer to Fig. 1-1)
1. Remove the 3 screws (1).
2. Remove the Stand Ass'y in the direction of arrow.
DISASSEMBLY INSTRUCTIONS
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
Stand Ass'y
Speaker Box Asss'y
(2)
(3)
Operation PCB
(B)
(A)
(C)
(1)
1-2: COVER BACK ASS'Y (Refer to Fig. 1-2)
1-4: MAIN UNIT (Refer to Fig. 1-4)
1. Remove the 9 screws (1).
1. Disconnect the following connectors:
2. Remove the Cover Back Ass'y in the direction of arrow.
(CN12 and CD3003).
2. Remove the 4 screws (1).
3. Remove the Main Unit in the direction of arrow (A).
4. Remove the Plate Jack in the direction of arrow (B).
Fig. 1-1
Fig. 1-2
(1)
(1)
Fig. 1-3
Front Cabi Ass'y
Plate Jack
(B)
(1)
Main Unit
(1)
(A)
Fig. 1-4
Cover Back Ass'y
(1) (1)
(1)
(1)
(1)
(1)
Remocon PCB
Operation PCB
(1)
(1)
Front Cabi Ass'y
Front Cabi Ass'y
Front Cabi Ass'y
(1)
B1-1
