MATERIALS REQUIRED
REQUIRED
●
1x 7/16” Wrench
●
Drill Set
-
1/8” Drill Bit
-
9/32” Drill Bit
●
1x 5/32” Ball End Allen Key (For 1/4”-20 Hardware)
●
1x Blue Threadlock (Medium Strength)
[RECOMMENDED ON T-NUT HARDWARE]
●
1x 1 oz Anti-seize Lubricant
[RECOMMENDED ON ALL NYLON LOCKNUT JOINTS]
●
1x Step Ladder
RECOMMENDED
●
1x Extra Person
●
Extra Rags (to keep things clean)
●
1x Tape Measure
●
Mild Soap + Warm Water (to clean off excess anti-seize)
*Included hardware shown on next page
