2A- Determine the desired location for the board pole on the driver’s side of your van. The top of
the pole mounts to the 8020 through the slots on the rack.
2B-
Roll 2x 15S T-NUTS
in to the 8020 approximately 2” apart to match the desired location
determined in step 2A.
2C-
Hold the pole in position and attach the top using 2x 3/4" SCREWS with 2x Black WASHERS
into existing T-NUTS. Screws should be hand tight minus 1 turn to allow adjustment in the next
step. (Apply threadlocker)
STEP 2
T-NUTS Drop into place
3/4” BL SCREW & 15S T-NUT (2 EA)
[1/4”-20 HARDWARE]
[APPLY THREADLOCKER]
