4
Setting the temperature
Fabric
Temperature control
NYLON/ACRYLIC/ACETATE
SILK/RAYON/POLYESTER
WOOL/COTTON
LINEN
MAX
1. Stand the iron on its heel and plug the power cord into wall socket.
2. Turn the iron temperature control knob until you get the desired
fabric/temperature setting. We recommend using the above table as a guide.
3. The temperature pilot light will light, indicating that the soleplate is heating up.
4. When the pilot light goes out, the required temperature has been reached. The
temperature pilot light will go on from time to time during ironing.
Dry ironing
1. Turn the temperature control knob to select the desired fabric/temperature
setting. The indicator pilot light will light, put the iron on the smooth and stable
place vertically.
2. When the indicator pilot light goes out, the required temperature has been
reached.
3. You can begin to iron.
Spraying
1. Ensure there is enough water in the water tank.
2. Press the spray button to produce a fine spray of spray nozzle and continue
ironing
Note:
Do not spray silk.
Strong steam
This function is used to iron out deep wrinkles, to iron cuffs and coarse fabrics.
1. Ensure that there is enough water in the water tank.
2. When the temperature control knob is set to steam setting (between “
” to
“MAX”) strong steam can be used.
3. Press the burst steam button, the soleplate will spray out strong steam.
Note:
Only use the steam push button when the steam iron has reached the steam or
maximum temperature.
Do not press this burst steam button more than 3 times at once. For optimal
steam output, leave an interval of at least four seconds between pressing the
burst steam button.
Never direct the steam towards people and animals. Burns or serious injury may
occur.
