3
DETAILS
1. Spray nozzle
7. Beaker
2. Burst steam button
8. Cord sleeve
3. Spray button
9. Pilot light cover
4. Water inlet cover
10. Handle lock button
5. Temperature control knob
11. Soleplate
6. Water tank
HOW TO USE
Note:
Remove any labels, stickers or protective foil that may be attached to the body or
soleplate of the iron before first use.
The iron may give off some smoke and emit an odor when you first use. This will
cease after a short while. It is safe and will not harm the performance of the iron.
Filling with water
1. Remove the mains plug from the wall socket before filling the iron.
2. Open water inlet cover.
3. Use the water beaker attached to fill clean tap water into water tank until “MAX”
filling level.
4. Replace water inlet cover.
Note:
If the water is very hard it is advisable to use distilled water mixed with tap water.
Do not fill the tank beyond the MAX indication.
Do not put perfume, vinegar, starch, descaling agents, ironing additives
chemically descaled water or other chemicals in the water tank.
