Orion OLS-8410NL, User Manual

Page: 17 / 45

-30- -31-
▶
FIRMWARE Configuration
Ÿ It displays the firmware version information.
1
. Select FIRMWARE from SETUP A menu.
‚ Move to FIRMWARE and press MENU button to check current firmware version.
2 . EXIT MENU
‚
Press Exit button to exit from the menu.
▶ LAN Configuration
Ÿ
It configures the IP address of the set to control via Ethernet.
1
. Select LAN from SETUP A menu.
‚
Move to LAN and press MENU button to check current LAN configuration.
‚ Configurations for DHCP ENABLE or DISABLE, IP ADDRESS, SUBNET MASK,
DEFAULT GATEWAY, DNS PRIMARY & SECONDARY, and PORT can be checked.
2
. EXIT MENU
‚
Press Exit button to exit from the menu.
▶
BAUD RATE Configuration
Ÿ It adjusts the communication rate to control the set via RS-
232
C.
1
. Select BAUD RATE from SETUP A menu.
‚ Move to BAUD RATE and press MENU button.
2 . Press MENU button to move into the sub-menu of BAUD RATE.
‚
Use
 
buttons to adjust values.
‚
Press MENU button to select a value.
3
. EXIT MENU
‚ Press Exit button to exit from the menu.