Orion OLMU-5520, User Manual

Page: 14 / 31

- 24 - - 25 -
3
.
6
. Connection of Control Cable
•
Control signal transmission can be connected by
3
different methods.(RS-
232
C or Ethernet or IR)
•
RS-
232
C and Ethernet connection cannot be used simultaneously.
• All control signals are output to the RS-
232
OUT after conversion to RS-
232
C signal.
3
.
6
.
1
. Connection of RS-
232
C Cable
•
Maximum use of RS-
232
C with Daisy Chain connection is
30
sets or less, if you need additional connection, use
RS-
232
C distributor.
3
.
6
.
2
. Connection of Ethernet Cable
•
In case of Ethernet connection, the control PC should be connected to one of monitor sets with Ethernet cable.For
the connection between the monitor sets, they should be connected with RS-
232
C cables.
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
RS- 232 C control PC
RS-
232
C
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
Ethernet control PC
HUB or Router
(Wireless & Cable)
LAN Cable
(Direct Cable)
LAN Cable
(Direct Cable)
LAN Cable (Cross Cable)