3
Table of Contents
1. Unpacking . . . . . . . . . . . . . . . . . . . . . . . 3
2. Parts List . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Assembly . . . . . . . . . . . . . . . . . . . . . . . . 3
4. Balancing the Telescope . . . . . . . . . . . . 5
5. Using Your Telescope . . . . . . . . . . . . . . . 5
6. Setting Up and Using the
Equatorial Mount . . . . . . . . . . . . . . . . . . 7
7. Collimating (Aligning the Mirrors) . . . . . 11
8. Astronomical Observing . . . . . . . . . . . . 14
9. Care and Maintenance . . . . . . . . . . . . . 17
10. Specifications . . . . . . . . . . . . . . . . . . . . 18
1. Unpacking
The telescope will arrive in two boxes; one box contains the
optical tube and accessories, the other contains the equatori-
al mount. Be careful unpacking the boxes. We recommend
keeping the boxes and all original packaging. In the event that
the telescope needs to be shipped to another location, or
returned to Orion for warranty repair, having the proper boxes
and packaging will help ensure that your telescope will sur-
vive the journey intact.
Make sure all the parts in the Parts List are present. Be sure
to check each interior box carefully, as some parts are
small. If anything appears to be missing or broken, immedi-
ately call Orion Customer Support (800-676-1343) or email
[email protected] for assistance.
2. Parts List
1
Tripod
1
Equatorial mount
1
Tripod support tray
1
Tube ring mounting plate
1
Counterweight shaft
2
Counterweights
2
Slow-motion control knobs
1
R.A. axis rear cover
1
Optical tube assembly
2
Tube rings with mounting screws
1
Latitude adjustment L-bolt
1
25mm Sirius Plössl eyepiece
1
10mm Sirius Plössl eyepiece
1
Finder scope
1
Finder scope bracket with O-ring
1
Dust cover
1
Collimation cap
3. Assembly
Assembling the telescope for the first time should take about
30 minutes. No tools are needed other than the ones provid-
ed. All screws should be tightened securely, but be careful not
to over-tighten or the threads may strip. Refer to Figure 1 dur-
ing the assembly process.
During assembly (and anytime, for that matter), do not touch
the surfaces of the telescope mirrors or lenses of the finder
scope or eyepieces with your fingers. The optical surfaces
have delicate coatings on them that can easily be damaged if
touched inappropriately. Never remove any lens assembly
from its housing for any reason, or the product warranty and
return policy will be voided.
1. Stand the tripod legs upright and spread the legs out as far
as they will go. Keep the tripod legs at their shortest (fully
retracted) length, for now; you can extend them to a more
desirable length later, after the scope is fully assembled.
C
ongratulations on your purchase of an Orion telescope. Your new SkyView Pro 6LT EQ is designed for,
high-resolution viewing, and astrophotography of astronomical objects. With its precision optics and stur-
dy equatorial mount, you’ll be able to enjoy hundreds of fascinating celestial denizens.
These instructions will help you set up, properly use, and care for your telescope. Please read them over
thoroughly before getting started.
WARNING:
Never look directly at the Sun
through your telescope or its finder scope—even
for an instant—without a professionally made
solar filter that completely covers the front of the
instrument, or permanent eye damage could
result. Young children should use this telescope
only with adult supervision.
Summary of Contents for SKYVIEW PRO 6LT EQ 9872
Page 19: ...19 ...
