ORION ITALIA IPR-D, Instruction Manual

Page: 25 / 53

Chapter 4: "SETPOINTS" Menu
CURRENT PROTECTION RELAY - IPR-D Manual P/N: IPR-D GBM 01/09/2006 4.1
4.
"SETPOINTS" menu
4.1 Setpoints page 1: SETPOINT ACCESS
SETPOINTS PAGE 1
SETPOINT ACCESS This PAGE contains messages for Setpoint access.
Press LINE key to pass to next Line.
ENTER ACCESS
CODE: X X X Enter the THREE-DIGIT access code using the digits from1 to 9.
[
→
§ 3.8 - ]. Manufacturer code: 111.
SETPOINT ACCESS
ENABLED It indicates that the entered code is right and that the SETPOINT values can be modified.
SETPOINT ACCESS
ONLY VIEW It indicates that the entered code is not right and that the SETPOINT values can only be
read.
ENTER NEW ACCESS
CODE? NO RANGE:
..............................................................................................................
NO; YES
The user can enter his own customized access code.
•
to confirm the code programmed by the Constructor.
1. press
LINE key to pass to IPR-D RELAY: IPR-D – FIRMWARE
•
to replace the code programmed by the Constructor with the customized one:
1. press
▲ VALUE key
→
YES will be displayed (the following line will be displayed);
2. press STORE key;
3. enter the new code that is automatically confirmed after entering;
4. press
LINE key to pass to the following line.
ENTER NEW ACCESS
CODE: X X X
Displayed only if "YES" has been
selected in the previous line.
Enter the THREE-DIGIT access code using the digits from1 to 9.
[
→
§ 3.8 - ]. Manufacturer code: 111.
NEW ACCESS CODE
STORED = X X X It indicates that the new access code has been stored.
IPR-D RELAY:
IPR-D - FIRMWARE It indicates the IPR-D firmware version.
END OF PAGE Last LINE of PAGE 1.
Press
LINE or ▲ PAGE, to pass to the first line of PAGE 2.
Before carrying out the programming of the unit, it is necessary to read and understand the indications
provided by the Manufacturer. All the programming must be carried out by qualified personnel with adequate
knowledge of the functioning of the unit and of the content of this manual.