ORION ITALIA IPR-D, Instruction Manual

Page: 13 / 53

Chapter 2: Installing
CURRENT PROTECTION RELAY - IPR-D Manual P/N: IPR-D GBM 01/09/2006 2.1
2. Installing
2.1 IDENTIFICATION
On the plate on the rear side of the IPR-D you can find the following information:
ORION ITALIA Manufacturer
PIACENZA 29100 Manufacturer’s address
TEL.: 0523 – 591161
FAX: 0523 – 593898
www.orionitalia.com
Internet
MADE IN ITALY
MODEL: IPR-D
Model name
SERIAL No. Serial number of the relay
MFG. DATE Date of manufacture
GROUNG CTs (SEC) Ground CT installed: 1 A or 5 A
2.2 UNPACKING
The shipping container includes:
- IPR-D
relay
- the fixing elements
- this instruction manual
- the Test certificate (if required)
As soon as you receive the unit, inspect it and inform ORION ITALIA of any damage.
If reshipment is required, the original container and packing should be used.
2.3 MOUNTING
The mounting should be carried out as follows:
1. Install the relay in a place where the humidity and temperature are those for which it has been designed [ Æ §
1.7 – “Specification”] and away from current conductors and sources of strong magnetic fields.
2. Put the relay inside a panel and place it so that the keypad is easily accessible and the display is visible.
3. Make a cutout in the panelboard of 137 x 137 mm [ Æ Fig. 2.1] and fix the relay by using the fixing elements
provided with the relay
.
Figure 2.1 – IPR-D overall dimensions
FRONT VIEW SIDE VIEW
REAR VIEW PANEL CUTOUT