manualshive.com logo in svg

ORiNG Transporter TAP-3120-M12, User Manual, Page: 29 / 49

Share
Download
ORiNG Transporter TAP-3120-M12 User Manual Download Page 29

TAP-3120-M12  User’s Manual 

ORing Industrial Networking Corp.                                                24 

Use the following DNS 
server addresses 

This option is selected by manually set. 

Preferred DNS:

 There is a default DNS server, and you can 

input another new DNS server. 

Alternate DNS: 

There is a default DNS server, and you can input 

another new DNS server. 

 

Setting DHCP Server 

 

The following table describes the labels in this screen. 

Label 

Description 

DHCP Server

 

Enable or Disable the DHCP Server function.  Enable – the AP 
will be the DHCP server on your local network 

Start IP Address

 

The dynamic IP assign range.    Low IP address is the beginning 
of the dynamic IP assigns range.  For example: dynamic IP 
assign range is from 192.168.1.100 to 192.168.1.200.  
192.168.1.100 will be the Start IP address. 

Maximum Number of 
IPs

 

The dynamic IP assign range.    High IP address is the end of the 
dynamic IP assigns range.  For example: dynamic IP assign 
range is from 192.168.1.100 to 192.168.1.200. 

100

  will be 

entering into textbox. 

Lease Time (Hour) 

It is the time period that system will reset the dynamic IP 
assignment to ensure the dynamic IP will not been occupied for a 
long time or the server doesn’t know that the dynamic IP is idle. 

DHCP Clients List   

List the devices on your network that are receiving dynamic IP 
addresses from the TAP-3120-M12. 

Summary of Contents for Transporter TAP-3120-M12


















































Reviews:

No comments