TAP-3120-M12 User’s Manual
ORing Industrial Networking Corp. 16
The working principle of
Repeater Mode
as follows:
In the figure, Repeater is used to extend the range of the wireless infrastructure by
forwarding traffic between associated wireless stations and another repeater or AP
connected to the wired LAN.
Setting Wireless
The following table describes the labels in this screen.
Label
Description
SSID
Service Set Identifier Default is the default setting. The SSID is
a unique name that identifies a network. All devices on the
network must share the same SSID name in order to
communicate on the network. If you change the SSID from the
default setting, input your new SSID name in this field.
Channel
Channel 6 is the default channel, input a new number if you want
LAN
WDS
LAN
WDS
Summary of Contents for Transporter TAP-3120-M12
Page 5: ......