ORiNG RGS-PR9000 User Manual Download Page 56

Page: 56 / 167

RGS-PR9000 Series User Manual

ORing Industrial Networking Corp

Label

Description

Aggr ID

The aggregation ID is associated with the aggregation instance.

For LLAG, the ID is shown as '

isid:aggr-id

' and for GLAGs as

aggr-id

Partner System ID

System ID (MAC address) of the aggregation partner

Partner Key

The key assigned by the partner to the aggregation ID

Last Changed

The time since this aggregation changed.

Last Channged

Indicates which ports belong to the aggregation of the

switch/stack. The format is: "

Switch ID:Port

Click to refresh the page immediately

Check to enable an automatic refresh of the page at regular

intervals

LACP Status

This page provides an overview of the LACP status for all ports.

Label

Description

Port

Switch port number

LACP

Yes

means LACP is enabled and the port link is up.

means

LACP is not enabled or the port link is down.

Backup

means the

Summary of Contents for RGS-PR9000








































































































































































Search results

Summary of Contents for RGS-PR9000

Reviews:

Related manuals for RGS-PR9000

Brands by name

Popular brands

ORiNG RGS-PR9000, User Manual

Search results

Summary of Contents for RGS-PR9000

Reviews:

Related manuals for RGS-PR9000

Brands by name

Popular brands