RGS-PR9000 Series User Manual
ORing Industrial Networking Corp
114
be queried up to 3 times before it is considered to be dead.
Dead Time
The dead time, which can be set to a number between 0 and 3600 seconds,
is the period during which the switch will not send new requests to a server
that has failed to respond to a previous request. This will stop the switch from
continually trying to contact a server that it has already determined as dead.
Setting the dead time to a value greater than 0 (zero) will enable this feature,
but only if more than one server has been configured.
5.8.5 RADIUS
Authentication and Accounting Server Configurations
The table has one row for each RADIUS authentication server and a number of columns,
which are:
Label
Description
#
The RADIUS authentication server number for which the configuration
below applies.
Enabled
Check to enable the RADIUS authentication server.
IP Address
The IP address or hostname of the RADIUS authentication server. IP
address is expressed in dotted decimal notation.
Port
The UDP port to use on the RADIUS authentication server. If the port is set
to
0
(zero), the default port (1812) is used on the RADIUS authentication
server.
Secret
The secret - up to 29 characters long - shared between the RADIUS
authentication server and the switch stack.
